Franz Pichler

Robeto Moreno Diaz

The concept of CAST as Computer Aided Systems Theory, was introduced by F. Pichler of Linz in the late 80’s to include those computer theoretical and practical developments as tools to solve problems in System Science. It was considered as the third component (the other two being CAD and CAM) that will provide for a complete picture of the path from Computer and Systems Sciences to practical developments in Science and Engineering. The University of Linz organized the ?rst CAST workshop in April 1988, which demonstrated the acceptance of the concepts by the scienti?c and technical community. Next, the University of Las Palmas de Gran Canaria joined the University of Linz to organize the ?rst international meeting on CAST, (Las Palmas February 1989), under the name EUROCAST’89, that was a very successful gathering of systems theorists, computer scientists and engineers from most of European countries, North America and Japan. ItwasagreedthatEUROCASTinternationalconferenceswouldbeorganized every two years. Thus, the following EUROCAST meetings took place in Krems (1991), Las Palmas (1993), Innsbruck (1995), Las Palmas (1997), Vienna (1999) and Las Palmas(2001), in addition to an extra-European CAST Conference in Ottawain1994.SelectedpapersfromthosemeetingswerepublishedbySpringer- Verlag Lecture Notes in Computer Science nos. 410, 585, 763, 1030, 1333, 1728 and 2178 and in several special issues of Cybernetics and Systems: an lnternat- nal Journal. EUROCAST and CAST meetings are de?nitely consolidated, as it is demonstrated by the number and quality of the contributions over the years.

9th International Workshop on Computer Aided Systems Theory, Las Palmas de Gran Canaria, Spain, February 24-28, 2003, Revised Selected Papers

Computer Aided Systems Theory - EUROCAST 2003

Roberto Moreno-Diaz

Computer Aided Systems Theory - Eurocast '89

Heinz Schwärtzel

Microtechnologies and their corresponding CAD tools have meanwhile reached alevel of sophistication that requires the application of theoretical means on all modelling levels of design and analysis. Also, there is a growing need for a scientific approach in modelling again. Many concepts provided by Systems Theory again turn out to be of major importance. This is especially valid for the design of "machines with intelligent behaviour". When dealing with complex systems, the engineering design has to be supported by CAD tools. Consequently, the methods of Systems Theory must also get computerized. The newly established field of "Computer Aided Systems Theory" (CAST) is a first effort in this direction. The goal of CAST research and development isto provide "Systems Theory Method Banks" which can be used in education and to provide a platform for the migration of CAST methods into existing CAD tools. This book, basing on different research and development projects in CAST, is written for engineers who are interested in using and developing CAST systems, particularly in thefield of Information and Systems Engineering.

Computer Aided Systems Theory for the Design of Intelligent Machines

CAST Methods in Modelling

Roberto Moreno Díaz

Alexis Quesada Arencibia

The concept of CAST as Computer Aided Systems Theory was introduced by F. Pichler in the late 1980s to refer to computer theoretical and practical developments as tools for solving problems in system science. It was thought of as the third component (the other two being CAD and CAM) required to complete the path from computer and systems sciences to practical developments in science and engineering. Franz Pichler, of the University of Linz, organized the first CAST workshop in April 1988, which demonstrated the acceptance of the concepts by the scientific and technical community. Next, the University of Las Palmas de Gran Canaria joined the University of Linz to organize the first international meeting on CAST (Las Palmas, February 1989) under the name EUROCAST'89. This proved to be a very successful gathering of systems theorists, computer scientists and engineers from most European countries, North America and Japan. It was agreed that EUROCAST international conferences would be organized every two years, alternating between Las Palmas de Gran Canaria and a continental European location. From 2001 the conference has been held exclusively in Las Palmas. Thus, successive EUROCAST meetings took place in Krems (1991), Las Palmas (1993), In- bruck (1995), Las Palmas (1997), Vienna (1999), Las Palmas (2001), Las Palmas (2003) Las Palmas (2005) and Las Palmas (2007), in addition to an extra-European CAST c- ference in Ottawa in 1994.

12th International Conference, Las Palmas de Gran Canaria, Spain, February 15-20, 2009, Revised Selected Papers

Computer Aided Systems Theory - EUROCAST 2009

Alexis Quesada-Arencibia

Roberto Moreno-Díaz

The two-volume set LNCS 8111 and LNCS 8112 constitute the papers presented at the 14th International Conference on Computer Aided Systems Theory, EUROCAST 2013, held in February 2013 in Las Palmas de Gran Canaria, Spain. The total of 131 papers presented were carefully reviewed and selected for inclusion in the books. The contributions are organized in topical sections on modelling biological systems; systems theory and applications; intelligent information processing; theory and applications of metaheuristic algorithms; model-based system design, verification and simulation; process modeling simulation and system optimization; mobile and autonomous transportation systems; computer vision, sensing, image processing and medical applications; computer-based methods and virtual reality for clinical and academic medicine; digital signal processing methods and applications; mechatronic systems, robotics and marine robots; mobile computing platforms and technologies; systems applications.

14th International Conference, Las Palmas de Gran Canaria, Spain, February 10-15, 2013. Revised Selected Papers, Part I

Computer Aided Systems Theory -- EUROCAST 2013

Peter Kopacek

Computer Aided Systems Theory (CAST) deals with the task of contributing to the creation and implementation of tools for the support of usual CAD tools for design and simulation by formal mathematical or logical means in modeling. Naturally,thebasisfortheconstructionandimplementationofCASTsoftwareis provided by the existing current knowledge in modeling and by the experience of practitioners in engineering design. Systems Theory, as seen from the viewpoint of CAST research and CAST tool development, has the role of providing formal frameworks and related theoretical knowledge for model-construction and model analysis. We purposely do not distinguish sharply between systems theory and CAST and other similar ?elds of research and tool development such as for example in applied numerical analysis or other computational sciences. TheheredocumentedEUROCASTconferencewhichtookplaceattheVienna University of Technology re?ects current mainstreams in CAST. As in the p- vious conferences new topics, both theoretical and application oriented, have been addressed. The presented papers show that the ?eld is widespread and that new - velopments in computer science and in information technology are the driving forces. Theeditorswouldliketothanktheauthorsforprovidingtheirmanuscriptsin hardcopyandinelectronicformontime.Thesta?ofSpringer-VerlagHeidelberg gave, as in previous CAST publications, valuable support in editing this volume.

A Selection of Papers from the 7th International Workshop on Computer Aided Systems Theory Vienna, Austria, September 29 - October 2, 1999 Proceedings

Computer Aided Systems Theory - EUROCAST'99

International Workshop on Computer Aided Systems Theory 1995 innsbruc

This book presents a collection of revised refereed papers selected from the contributions to the Fifth International Workshop on Computer Aided Systems Theory, EUROCAST '95, held in Innsbruck, Austria in May 1995. The 42 full papers contained have been contributed by CAST theoreticians, tool-makers, designers, and appliers and reflect the full spectrum of activities in the area. The papers are organized in sections on systems theory, design environments, complex systems design, and specific applications.

A Selection of Papers from the Fifth International Workshop on Computer Aided Systems Theory, Innsbruck, Austria, May 22 - 25, 1995. Proceedings

Computer Aided Systems Theory - EUROCAST '95

Nonlinear Evolution Equations and Dynamical Systems (NEEDS) provides a presentation of the state of the art. Except for a few review papers, the 40 contributions are intentially brief to give only the gist of the methods, proofs, etc. including references to the relevant litera- ture. This gives a handy overview of current research activities. Hence, the book should be equally useful to the senior resercher as well as the colleague just entering the field. Keypoints treated are: i) integrable systems in multidimensions and associated phenomenology ('dromions'); ii) criteria and tests of integrability (e.g., Painlevé test); iii) new developments related to the scattering transform; iv) algebraic approaches to integrable systems and Hamiltonian theory (e.g., connections with Young-Baxter equations and Kac-Moody algebras); v) new developments in mappings and cellular automata, vi) applications to general relativity, condensed matter physics, and oceanography.

A Selection of Papers from the International Workshop EUROCAST '89, Las Palmas, Spain, February 26 - March 4, 1989. Proceedings

Computer Aided Systems Theory - EUROCAST '89

International Workshop on Computer Aided Systems Theory

Roberto Moreno Diaz

This volume contains a selection of papers on the current state of research in computer aided systems theory and its relations to CAD applications in engineering. Topics include systems theory and CAST methodology, modeling environments, CAST method base systems and artificial vision, and information and control systems.

A Selection of Papers from the Second International Workshop on Computer Aided Systems Theory, Krems, Austria, April 15-19, 1991. Proceedings

Computer Aided Systems Theory - EUROCAST '91

The two-volume set LNCS 12013 and 12014 constitutes the thoroughly refereed proceedings of the 17th International Conference on Computer Aided Systems Theory, EUROCAST 2019, held in Las Palmas de Gran Canaria, Spain, in February 2019. The 123 full papers presented were carefully reviewed and selected from 172 submissions. The papers are organized in the following topical sections: Part I: systems theory and applications; pioneers and landmarks in the development of information and communication technologies; stochastic models and applications to natural, social and technical systems; theory and applications of metaheuristic algorithms; model-based system design, verification and simulation. Part II: applications of signal processing technology; artificial intelligence and data mining for intelligent transportation systems and smart mobility; computer vision, machine learning for image analysis and applications; computer and systems based methods and electronic technologies in medicine; advances in biomedical signal and image processing; systems concepts and methods in touristic flows; systems in industrial robotics, automation and IoT.

17th International Conference, Las Palmas de Gran Canaria, Spain, February 17–22, 2019, Revised Selected Papers, Part I

Computer Aided Systems Theory – EUROCAST 2019

The two-volume proceedings, LNCS 6927 and LNCS 6928, constitute the papers presented at the 13th International Conference on Computer Aided Systems Theory, EUROCAST 2011, held in February 2011 in Las Palmas de Gran Canaria, Spain. The total of 160 papers presented were carefully reviewed and selected for inclusion in the books. The contributions are organized in topical sections on concepts and formal tools; software applications; computation and simulation in modelling biological systems; intelligent information processing; heurist problem solving; computer aided systems optimization; model-based system design, simulation, and verification; computer vision and image processing; modelling and control of mechatronic systems; biomimetic software systems; computer-based methods for clinical and academic medicine; modeling and design of complex digital systems; mobile and autonomous transportation systems; traffic behaviour, modelling and optimization; mobile computing platforms and technologies; and engineering systems applications.

13th International Conference, Las Palmas de Gran Canaria, Spain, February 6-11, 2011, Revised Selected Papers

Computer Aided Systems Theory -- EUROCAST 2011

This book constitutes the thoroughly refereed post-proceedings of the 11th International Conference on Computer Aided Systems Theory, EUROCAST 2007. Coverage in the 144 revised full papers presented includes formal approaches, computation and simulation in modeling biological systems, intelligent information processing, heuristic problem solving, signal processing architectures, robotics and robotic soccer, cybercars and intelligent vehicles and artificial intelligence components.

Franz Pichler

Books

Your next favorite book is out there