Mohamed Haddar

Fakher Chaari

Radoslaw Zimroz

Walter Bartelmus

The book provides readers with a snapshot of recent research and technological trends in the field of condition monitoring of machinery working under a broad range of operating conditions. Each chapter, accepted after a rigorous peer-review process, reports on an original piece of work presented and discussed at the 4th International Conference on Condition Monitoring of Machinery in Non-stationary Operations, CMMNO 2014, held on December 15-16, 2014, in Lyon, France. The contributions have been grouped into three different sections according to the main subfield (signal processing, data mining or condition monitoring techniques) they are related to. The book includes both theoretical developments as well as a number of industrial case studies, in different areas including, but not limited to: noise and vibration; vibro-acoustic diagnosis; signal processing techniques; diagnostic data analysis; instantaneous speed identification; monitoring and diagnostic systems; and dynamic and fault modeling. This book not only provides a valuable resource for both academics and professionals in the field of condition monitoring, it also aims at facilitating communication and collaboration between the two groups.

Proceedings of the Fourth International Conference on Condition Monitoring of Machinery in Non-Stationary Operations, CMMNO'2014, Lyon, France December 15-17

Advances in Condition Monitoring of Machinery in Non-Stationary Operations

Giorgio Dalpiaz

Riccardo Rubini

Gianluca D'Elia

Marco Cocconcelli

This book presents the processing of the third edition of the Condition Monitoring of Machinery in Non-Stationary Operations (CMMNO13), which was held in Ferrara, Italy. This yearly event merges an international community of researchers who met – in 2011 in Wroclaw (Poland) and in 2012 in Hammamet (Tunisia) – to discuss issues of diagnostics of rotating machines operating in complex motion and/or load conditions. The growing interest of the industrial world on the topics covered by the CMMNO13 involves the fields of packaging, automotive, agricultural, mining, processing and wind machines in addition to that of the systems for data acquisition. The participation of speakers and visitors from industry makes the event an opportunity for immediate assessment of the potential applications of advanced methodologies for the signal analysis. Signals acquired from machines often contain contributions from several different components as well as noise. Therefore, the major challenge of condition monitoring is to point out the signal content that is related to the state of the monitored component particularly in non-stationary conditions.

Proceedings of the third International Conference on Condition Monitoring of Machinery in Non-Stationary Operations CMMNO 2013

Anna Timofiejczuk

This book provides readers with a snapshot of recent methods for non-stationary vibration analysis of machinery. It covers a broad range of advanced techniques in condition monitoring of machinery, such as mathematical models, signal processing and pattern recognition methods and artificial intelligence methods, and their practical applications to the analysis of nonstationarities. Each chapter, accepted after a rigorous peer-review process, reports on a selected, original piece of work presented and discussed at the International Conference on Condition Monitoring of Machinery in Non-Stationary Operations, CMMNO’2016, held on September 12 – 16, 2016, in Gliwice, Poland. The contributions cover advances in both theory and practice in a variety of subfields, such as: smart materials and structures; fluid-structure interaction; structural acoustics as well as computational vibro-acoustics and numerical methods. Further topics include: engines control, noise identification, robust design, flow-induced vibration and many others. By presenting state-of-the-art in predictive maintenance solutions and discussing important industrial issues the book offers a valuable resource to both academics and professionals and is expected to facilitate communication and collaboration between the two groups.

Proceedings of the 5th International Conference on Condition Monitoring of Machinery in Non-stationary Operations, CMMNO’2016, 12–16 September 2016, Gliwice, Poland

Abdelmajid Benamara

Mnaouar Chouchane

Nizar Aifaoui

Zouhaier Affi

Mohamed Slim Abbes

Lassad Walha

Lotfi Romdhane

This book offers a collection of original peer-reviewed contributions presented at the 8th International Congress on Design and Modeling of Mechanical Systems (CMSM’2019), held in Hammamet, Tunisia, from the 18th to the 20th of March 2019. It reports on research, innovative industrial applications and case studies concerning mechanical systems and related to modeling and analysis of materials and structures, multiphysics methods, nonlinear dynamics, fluid structure interaction and vibroacoustics, design and manufacturing engineering. Continuing on the tradition of the previous editions, these proceedings offers a broad overview of the state-of-the art in the field and a useful resource for academic and industry specialists active in the field of design and modeling of mechanical systems. CMSM’2019 was jointly organized by two leading Tunisian research laboratories: the Mechanical Engineering Laboratory of the National Engineering School of Monastir, University of Monastir and the Mechanical, Modeling and Manufacturing Laboratory of the National Engineering School of Sfax, University of Sfax.

Proceedings of the 8th Conference on Design and Modeling of Mechanical Systems, CMSM'2019, March 18–20, Hammamet, Tunisia

Design and Modeling of Mechanical Systems - IV

Nabih Feki

Mohamed Taktak

Mohamed Amine Ben Souf

The book provides readers with a snapshot of recent research and industrial trends in field of industrial acoustics and vibration. Each chapter, accepted after a rigorous peer-review process, reports on a selected, original piece of work presented and discussed at the Third International Conference on Acoustics and Vibration (ICAV2021), which was organized by the Tunisian Association of Industrial Acoustics and Vibration (ATAVI) and held online on March 15-16, 2021, from Sfax, Tunisia. The contributions cover advances in both theory and practice in a variety of subfields, such as: smart materials and structures; fluid-structure interaction; structural acoustics as well as computational vibro-acoustics and numerical methods. Further topics include: engines control, noise identification, robust design, flow-induced vibration and many others. This book provides a valuable resource for both academics and professionals dealing with diverse issues in applied mechanics. By combining advanced theories with industrial issues, it is expected to facilitate communication and collaboration between different groups of researchers and technology users.

Proceedings of the Third International Conference on Acoustics and Vibration (ICAV2021), March 15-16, 2021

Advances in Acoustics and Vibration III

Xavier Chiementin

Fabrice Bolaers

This book offers an overview of current methods for the intelligent monitoring of rotating machines. It describes the foundations of smart monitoring, guiding readers to develop appropriate machine learning and statistical models for answering important challenges, such as the management and analysis of a large volume of data. It also discusses real-world case studies, highlighting some practical issues and proposing solutions to them. The book offers extensive information on research trends, and innovative strategies to solve emerging, practical issues. It addresses both academics and professionals dealing with condition monitoring, and mechanical and production engineering issues, in the era of industry 4.0.

Smart Monitoring of Rotating Machinery for Industry 4.0

Mounir Ben Amar

Anas Bouguecha

Elhem Ghorbel

Aberrahim El Mahi

This book reports on innovative materials research with a special emphasis on methods, modeling, and simulation tools for analyzing material behavior, emerging materials, and composites, and their applications in the field of manufacturing. Chapters are based on contributions to the third International Conference on Advanced Materials Mechanics and Manufacturing, A3M2021, organized by the Laboratory of Mechanics, Modeling, and Manufacturing (LA2MP) of the National School of Engineers of Sfax, Tunisia and held online on March 25-27, 2021. They cover a variety of topics, spanning from experimental analysis of material plasticity and fatigue, numerical simulation of material behavior, and optimization of manufacturing processes, such as cutting and injection, among others. Offering a good balance of fundamental research and industrially relevant findings, they provide researchers and professionals with a timely snapshot of and extensive information on current developments in the field and a source of inspiration for future research and collaboration.

Proceedings of the Third International Conference on Advanced Materials, Mechanics and Manufacturing (A3M’2021), March 25-27, 2021

Advances in Materials, Mechanics and Manufacturing II

Ahmed Felkaoui

This book provides readers with a timely snapshot of the potential offered by and challenges posed by signal processing methods in the field of machine diagnostics and condition monitoring. It gathers contributions to the first Workshop on Signal Processing Applied to Rotating Machinery Diagnostics, held in Setif, Algeria, on April 9-10, 2017, and organized by the Applied Precision Mechanics Laboratory (LMPA) at the Institute of Precision Mechanics, University of Setif, Algeria and the Laboratory of Mechanics, Modeling and Manufacturing (LA2MP) at the National School of Engineers of Sfax. The respective chapters highlight research conducted by the two laboratories on the following main topics: noise and vibration in machines; condition monitoring in non-stationary operations; vibro-acoustic diagnosis of machinery; signal processing and pattern recognition methods; monitoring and diagnostic systems; and dynamic modeling and fault detection.

Proceedings of the First Workshop on Signal Processing Applied to Rotating Machinery Diagnostics, SIGPROMD’2017, April 09-11, 2017, Setif, Algeria

Rotating Machinery and Signal Processing

Jean-Yves Choley

Jamel Louati

Maher Barkallah

Omar Ayadi

This book gathers original findings, both theoretical and experimental, related to various cutting-edge topics in the design and modeling of mechatronic systems, including multiphysics problems. It presents peer-reviewed papers from the first installment of the Mechatronics 4.0 workshop, which was jointly organized by the Laboratory of Mechanics, Modeling and Manufacturing (LA2MP), National School of Engineers of Sfax, Tunisia, and the QUARTZ Laboratory, Higher Institute of Mechanics of Paris, SUPMECA, France. The event follows in the tradition of the Workshop on Mechatronic Systems (JSM2014), organized by the same universities, while shifting the focus to the concept of Industry 4.0. As this new type of industry is emerging as the convergence of the virtual world, digital design, and management with real-world products and objects, the chapters gathered here highlight recent work on mechatronics systems that are expected to help shape the industry of tomorrow. Thanks to a healthy balance of theory and practical findings, the book offers a timely snapshot for the research and industrial communities alike, as well as a bridge to facilitate communication and collaboration between the two groups.

Proceedings of the First International Workshop on Mechatronics 4.0, June 8–9, 2019, Mahdia, Tunisia

Mechatronics 4.0

Lassaad Walha

Abdessalem Jarraya

Fathi Djemal

Moez Abdennadher

This book offers a collection of original peer-reviewed contributions presented at the 9th International Congress on Design and Modeling of Mechanical Systems (CMSM’2021), held on December 20-22, 2021, in Hammamet, Tunisia. It reports on research findings, advanced methods and industrial applications relating to mechanical systems, materials and structures, and machining. It covers vibration analysis, CFD modeling and simulation, intelligent monitoring and control, including applications related to industry 4.0 and additive manufacturing. Continuing on the tradition of the previous editions, and with a good balance of theory and practice, the book offers a timely snapshot, and a useful resource for both researchers and professionals in the field of design and modeling of mechanical systems.

Proceedings of the 9th Conference on Design and Modeling of Mechanical Systems, CMSM'2021, December 20-22, 2021, Hammamet, Tunisia

Design and Modeling of Mechanical Systems - V

Stephan Schmidt

Ahmed Hammami

Philippus Stephanus Heyns

This book provides readers with an overview of recent theories and methods for studying complex mechanical systems used in energy production, such as wind turbines, but not limited to them. The emphasis is put on strategies for increasing energy efficiency, and on recent industrial applications. Topics cover dynamics and vibration, vibroacoustics, engineering design, modelling and simulation, fault diagnostics, signal processing and prognostics. The book is based on peer-review contributions and invited talks presented at the first International Workshop on MOdelling and Simulation of COmplex Systems for Sustainable Energy Efficiency, MOSCOSSEE 2021, held online on February 25-26, 2021, and organized by the LAboratory of Mechanics, Modelling and Production (LA2MP) from University of Sfax, Tunisia and the Department of Mechanical and Aeronautical engineering, Centre of Asset Integrity Management (C-AIM) from University of Pretoria, South Africa. By offering authoritative information on innovative methods and tools for application in renewable energy production, it provides a valuable resource to both academics and professionals, and a bridge to facilitate communication between the two groups.

Contributions to the First International Workshop on Modelling and Simulation of Complex Systems for Sustainable Energy Efficiency, MOSCOSSEE’2021, February 25-26, 2021

Modelling and Simulation of Complex Systems for Sustainable Energy Efficiency

The book offers a snapshot of the state-of-art in the field of model-based mechatronic system design. It covers topics including machine design and optimization, predictive systems in manufacturing networks, and the development of software for modeling and simulation of processes, which are supplemented by practical case studies. The book is a collection of fifteen selected contributions presented during the Workshop on Mechatronic Systems, held on March 17-19, 2014, in Mahdia, Tunisia. The workshop was jointly organized by the Laboratory of Mechanics Modeling and Production (LA2MP) of the National School of Engineers Sfax, Tunisia, and the Laboratory for Mechanical Systems and Materials Engineering (LISMMA) of Higher Institute of Mechanics (SUPMECA), Paris, France.

Proceedings of the Second Workshop on Mechatronic Systems JSM’2014

Mechatronic Systems: Theory and Applications

Abdelmjid Saka

Zakaria Chalh

Mohammed Alfidi

This book reports on innovative concepts and practical solutions at the intersection between engineering design, engineering production and industrial management. It covers cutting-edge design, modeling and control of dynamic and multiphysics systems, knowledge management systems in industry 4.0, cyber-physical production systems, additive and sustainable manufacturing and many other related topics. The original, carefully selected, peer-reviewed chapters highlight collaborative works between different countries and between industry and universities, thus offering a timely snapshot for the research and industrial communities alike, as well as a bridge to facilitate communication and collaboration.

Proceedings of the 11th International Conference on Integrated Design and Production, CPI 2019, October 14-16, 2019, Fez, Morocco

Advances in Integrated Design and Production

Chafik Karra

This book offers a collection of original peer-reviewed contributions presented at the 7th International Congress on Design and Modeling of Mechanical Systems (CMSM’2017), held in Hammamet, Tunisia, from the 27th to the 29th of March 2017. It reports on both research findings, innovative industrial applications and case studies concerning mechanical systems and related to modeling and analysis of materials and structures, multiphysics methods, nonlinear dynamics, fluid structure interaction and vibroacoustics, design and manufacturing engineering. Continuing on the tradition of the previous editions, this proceedings offers a broad overview on the state-of-the art in the field and a useful resource for academic and industry specialists active in the field of design and modeling of mechanical systems. CMSM’2017 was jointly organized by two leading Tunisian research laboratories: the Mechanical, Modeling and Manufacturing Laboratory of the National Engineering School of Sfax and the Mechanical Engineering Laboratory of the National Engineering School of Monastir..

Proceedings of the 7th Conference on Design and Modeling of Mechanical Systems, CMSM'2017, March 27–29, Hammamet, Tunisia

Design and Modeling of Mechanical Systems—III

Mohamed Haddar

Books

Your next favorite book is out there