Vernal E. Edlund

R. S. Lang

Pyrometallurgical studies by the Bureau of Mines demonstrated the feasibllity of sintering and smelting a low-grade flotation concentrate made by pilot-plant processing 10-percent manganese ore from the Maggie Canyon deposit, Mohave County, Ariz. Under optimum conditions 85 percent of the manganese in a flotation concentrate that assayed 36 percent manganese was recovered as standard ferromanganese. A blend of this flotation concentrate with high-grade dithionate pilot plant precipitate was similarly processed with a recovery of 90 percent of the manganese. Thorough mixing and pelletizing of the charge before treatment on the sinter hearth was necessary to produce a well agglomerated product by single pass sintering. Although satisfactory sinter was produced from a variety of material combinations, best results were obtained on a charge that contained 80 percent flotation concentrate and 20 percent return sinter fines. This combination was mixed with 6 percent coke, based on weight of concentrate; and 12 percent moisture. Sintering such a charge yielded a well agglomerated product containing over 80 percent coarse material, The results of standard crushing tests showed that the product was physically comparable to iron ore sinters and manganese nodules. A ferrograde sinter of acceptable strength was made by a single-pass processing of a blend of the flotation concentrate and the leach plant precipitate. Sintering the precipitate alone proved difficult because of its relatively high manganese content and physical nature. However, a satisfactory single-pass sinter was made by increasing the proportion of return sinter fines in the charge to 40 percent and the moisture content to 22 percent.

Vernal E. Edlund

Books

Your next favorite book is out there